📋 Applies to: Admin · Partner Admin
Module: Management → Fleets
Last reviewed: 2026-06
Owner: Support
Configure Alvys to automatically assign the correct fleet to a load based on the truck, trailer, or driver on that load. Set a default fleet for loads covered by external carriers. This setting is configured once and runs automatically on every new load.
Overview
The Auto-Assign Fleets feature removes the need to manually set a fleet on every load. When enabled, Alvys checks the fleet associated with the truck, trailer, or driver assigned to the load and applies that fleet to the load automatically. You can also designate a default fleet for loads covered by external carriers, ensuring all loads are attributed to a fleet for reporting purposes.
Synonyms: auto-assign fleet, automatic fleet assignment, fleet automation, fleet auto-assign.
Before You Start
Only users with the Admin or Partner Admin role can access Management → Fleets and configure this feature.
Steps
Navigate to Management → Fleets. From the main navigation menu, go to Management, then click Fleets.
Open the Auto-Assign setup. On the Fleets page, locate the "Auto-assign to loads" banner. Click the Add Automation button within the banner.
Select the Asset Fleet matching rule. In the modal that opens, select Asset Fleet as the matching rule. This tells Alvys to match the fleet on a load to the fleet of the truck, trailer, or driver assigned to that load.
Set a default fleet for external carriers (recommended). When a load is covered by an external carrier rather than one of your internal assets, Alvys needs a designated fleet for reporting. In the same modal, select a fleet to use as the default for these loads.
💡 Create a dedicated fleet named "External" or "Brokerage Loads" and select it here.
Save the automation. Click Save to confirm your settings. The Fleets page updates to show the automation as active.
Result
Once active, every time a truck, trailer, or driver is assigned to a load, Alvys automatically finds the fleet that asset belongs to and applies it to the load. Loads covered by external carriers receive the default fleet you configured.
Variations
Disable Auto-Assign
If you need to turn this feature off:
Go to Management → Fleets.
Click Edit on the active Auto-assign banner.
In the edit screen, click the Disable button.
Click Save to apply the change.
Troubleshooting
Fleet was not automatically assigned to a load
Auto-assignment only runs when the assigned asset has a fleet linked to its profile in Alvys. If the truck, trailer, or driver on a load is not assigned to any fleet, auto-assignment cannot run for that asset. Ensure all assets are linked to a fleet in their respective profiles under Assets.
The wrong fleet was applied to a load
Alvys applies the fleet from the matching asset. If the wrong fleet was applied, the asset may be linked to an incorrect fleet in its profile. Update the asset's fleet assignment, then manually correct the fleet on the affected load.
FAQs
Q: Can I manually change the fleet on a load after auto-assignment runs?
A: Yes. Auto-assignment sets the fleet as a starting point. You can manually update the assigned fleet on any load at any time.
Q: Does this feature apply retroactively to loads created before I enabled it?
A: No. Auto-assign only applies to new assignments made after the feature is activated. Existing loads are not updated.
Q: What happens if the truck and driver on a load belong to different fleets?
A: Alvys applies the fleet from the first asset it matches. To avoid inconsistencies, ensure the truck, trailer, and driver on each load belong to the same fleet where possible.