📋 Applies to: Admin · Operations Manager · Dispatcher
Module: Management > Integrations
Provider: FleetPulse · Integration type: One-way · Sync direction: Alvys pulls trailer location and tether status from FleetPulse
Last reviewed: 2026-06 · Owner: Support team
FleetPulse is a telematics provider that connects with Alvys to bring real-time trailer locations and tether status into your dispatch workflow. Also referred to as trailer tracking, asset tracking, or telematics integration.
Overview
FleetPulse is a telematics provider that connects with Alvys to bring real-time trailer locations and tether status into your dispatch workflow. This integration is also referred to as trailer tracking, asset tracking, or telematics integration.
Connecting FleetPulse to Alvys allows your team to view current trailer locations and whether each trailer is tethered or untethered, directly from Alvys.
FleetPulse is a trailer-focused integration. Truck location tracking is not supported through FleetPulse. Hours of Service (HOS) data and IFTA mileage are also not available.
Prerequisites
Before connecting, confirm you have the following:
An active FleetPulse account
Your FleetPulse username and password (must be API-enabled credentials — see note below)
The "Admin" role in Alvys
⚠️ FleetPulse requires API-enabled credentials, not a standard FleetPulse login. Before connecting, create a new standard user in FleetPulse dedicated exclusively to API access, then contact your FleetPulse representative and request that this user be upgraded for API access. API-enabled credentials provide stable, long-term access and prevent connection interruptions.
How to connect
FleetPulse uses a username and password to authenticate. Alvys handles session management in the background after the initial connection.
Go to "Management" > "Integrations" in the top navigation.
Find "FleetPulse" in the list of available integrations and click to open it.
Enter your FleetPulse username and password. Only two fields are required.
If your account has multiple subsidiaries, select the subsidiaries that should use this integration before clicking Save.
Click "Save". Alvys will authenticate with FleetPulse and store the session. Once confirmed, the integration status changes to active. Alvys automatically refreshes the connection in the background; you do not need to reconnect manually.
Map trailers to FleetPulse Unit IDs
After the integration is active, map each trailer in Alvys to its corresponding FleetPulse Unit ID. This tells Alvys which FleetPulse device to pull location data from for each trailer.
Go to "Assets" > "Trailers" in the left navigation.
Double-click a trailer to open its profile.
Scroll to the "ELD Integrations" section and click "Add Integration".
Select "FleetPulse" from the dropdown.
Enter the FleetPulse Unit ID for this trailer.
Click "Update Trailer" to save your changes.
Repeat for each trailer you want to track.
What syncs
The following data is pulled from FleetPulse into Alvys:
Trailer location: Current GPS coordinates for trailers that have an active location signal
Tether status: Whether the trailer is currently "Tethered" (connected to a truck) or "Untethered" (not connected)
Truck location data is not returned by FleetPulse. Trucks will not appear with location data through this integration. HOS clocks and IFTA mileage are not supported by FleetPulse and will not appear in Alvys.
Alvys requests updated trailer location and tether status from FleetPulse on a regular basis. Trailers must have a valid GPS signal (latitude and longitude) to appear in tracking. Trailers without an active GPS signal will not show a location. Alvys automatically refreshes the FleetPulse connection in the background.
What is not supported:
Truck location is not supported — only trailers
HOS (Hours of Service) clocks are not available through FleetPulse
IFTA mileage reporting is not available through FleetPulse
Trailers without a valid GPS signal will not show a location
Troubleshooting
Trailer location is not showing
Confirm the trailer has a FleetPulse device installed and that the device has an active GPS signal. Trailers without a valid GPS reading will not display a location.
Verify your username and password in Alvys match your FleetPulse account. Go to "Management" > "Integrations" and re-enter your credentials if needed.
Check that the integration status shows as active.
Tether status is not displaying
Confirm the trailer's FleetPulse device is actively reporting data to FleetPulse's servers.
Verify the device supports tether status reporting — not all FleetPulse devices report tether status.
Truck location is missing
Truck location is not supported by FleetPulse. This is expected behavior. If you need truck location tracking, connect a different telematics provider such as Geotab or Motive.
FAQs
Q: Why do I see trailer locations but not truck locations with FleetPulse?
A: FleetPulse is designed for trailer tracking. Truck location data is not returned by this integration. To track truck locations, connect a telematics provider that supports truck tracking, such as Geotab or Motive.
Q: What does "Untethered" mean?
A: "Untethered" means the trailer is not currently connected to a truck. "Tethered" means the trailer is connected to and being pulled by a truck.
Q: Do I need to log back in to FleetPulse regularly?
A: No. Alvys automatically manages the session with FleetPulse in the background. You do not need to re-enter credentials or manually reconnect after the initial setup.
Q: Why is a trailer's location blank even though it has a device?
A: Trailer location only shows when the device has an active GPS signal with valid coordinates. If the device is in a location with poor GPS reception, or if the device is powered off, the location will be blank.
Q: Where can I find my FleetPulse Unit IDs?
A: You can find the Unit ID for each trailer in your FleetPulse account. Open the trailer record in FleetPulse and look for the Unit ID field. Contact your FleetPulse representative if you need help locating this value.
Q: Why do I need API-enabled credentials to connect FleetPulse?
A: FleetPulse distinguishes between standard user credentials and API-enabled credentials. Standard credentials expire frequently and cause connection interruptions. API-enabled credentials are designed for integrations and provide stable, long-term access. Contact your FleetPulse representative to upgrade a standard user account to API access.
Q: What trailer data does FleetPulse send to Alvys?
A: FleetPulse sends current GPS coordinates (trailer location) and tether status to Alvys. Tether status indicates whether the trailer is currently connected to a truck (Tethered) or disconnected (Untethered). Truck location, HOS data, and IFTA mileage are not available through this integration.