👤 Who is this for? Admin, Operations Manager, Dispatcher

⏱️ Estimated time: 20 minutes

Teletrac Navman Director is a fleet management platform that provides vehicle tracking and driver hours of service monitoring. This integration allows Alvys to pull real-time location data and driver HOS information from Teletrac Navman, giving you visibility in dispatch planning and on the Asset Map.

To get started, you'll need API credentials from Teletrac Navman, then configure the integration in Alvys and map your assets and drivers.

Before you can connect Teletrac Navman to Alvys, you'll need to request API credentials from Teletrac Navman support.

Contact Teletrac Navman at [email protected] and request API credentials. Make sure to mention that the integration partner is Alvys.

They'll provide you with a Username and Password. Keep these credentials handy for the next step.

Once you have your credentials, you're ready to configure Teletrac Navman in Alvys.

Navigate to Company Profile by clicking your profile icon in the lower left corner, then select the subsidiary you want to configure and click the Integrations tab.

Expand the ELD section and click the pencil icon on the Teletrac Navman card.

Enter your Teletrac Navman Username and Password, then click Save.

Alvys will validate your credentials. If everything looks good, the integration will be active.

Now that the integration is configured, you need to tell Alvys which Teletrac Navman asset name corresponds to each truck or trailer.

Go to Assets in the left menu and select Trucks or Trailers.

Double-click the asset you want to configure, then scroll down to the ELD Integrations section and click Add Integration.

Select Teletrac Navman from the dropdown.

The Integration ID must match the Name of the truck or trailer in your Teletrac Navman Director portal. This is case-sensitive, so make sure both match exactly.

Enter the asset name in the Integration ID field and click Save. Repeat this process for each truck or trailer you want to track with Teletrac Navman.

To view driver hours of service in loads and the Dispatch Planner, you need to map each driver to their Teletrac Navman driver name.

Go to Assets in the left menu and select Drivers.

Double-click the driver you want to configure, then find the ELD Providers section and click Add ELD.

Select Teletrac Navman from the dropdown.

The Integration ID must match the Name of the driver in your Teletrac Navman Director portal. This is case-sensitive, so make sure both match exactly.

Enter the driver name in the Integration ID field and click Save. Repeat this process for each driver who uses Teletrac Navman for their hours of service.

Where do I find my Teletrac Navman asset and driver names?

You can find the names in your Teletrac Navman Director portal. Make sure to use the exact name as it appears in the portal, including matching capitalization.

Can I track both assets and driver HOS?

Yes, Teletrac Navman supports both asset location tracking and driver hours of service tracking in Alvys.

What happens if I enter invalid credentials?

As of February 2025, Alvys validates credentials before saving, so you'll see an error immediately if your credentials are incorrect.